Posted on

ModBerry M500 upgrades to Raspberry Pi 3 B+

The latest version of Raspberry Pi development board, Raspberry Pi Model 3 B+, is now available as a platform for ModBerry M500 industrial computer series. Raspberry Pi 3 Model B+ (Plus) offers has more computing power and much greater possibilities in the field of wired and wireless communication.

The biggest new feature introduced in 2016 is the Raspberry Pi 3 wireless support. Now the creators took a step forward and refined the solution. The new Raspberry Pi 3 Model B+ – supports two-band Wi-Fi (2.4 GHz and new 5 GHz), Bluetooth version 4.2  and Ethernet over USB 2.0 (up to 300 Mb / s). Upgraded ModBerry M500 series is powered by s more powerful heart, in the form of a Broadcom BCM2837B0 quad-core processor clocked at 1.4 GHz. Power-over-Ethernet support has also appeared, and heat dissipation has been improved.

ModBerry M500 on Raspberry Pi 3 Model B+

ModBerry M500 vs ModBerry 500(CM3)

Standard ModBerry 500 series is based on Raspberry Pi Compute Module 3, an industrial version of commercial Raspberry Pi branch, with flagship Raspberry Pi 3 Model B+. Used Compute Module is more suitable for custom products, such as our ModBerry 500 industrial computer, which can be adapted to customer’s need with wide range of extension modules from TECHBASE. ModBerry equipped with CM3 can be configured to support chosen number of RS-232/485 serial ports, Digital and Analog I/Os, various setup of Ethernet/USB ports, CAN interface, 1-Wire and wireless modems: 3G/LTE, GPRS/EDGE, GPS, LoRa, ZigBee, Wireless M-Bus, NarrowBand-IoT and many more.

The updated M500 availability

Currently the updated M500 samples, are available on demand. Please contact TECHBASE’s sales department via http://modberry.techbase.eu/ contact form with specific requirements to receive an offer that will suit the project’s needs. Since the M300 update is still under the development, the pricing of each unit may vary on the basis of configuration and order quota

Posted on

ModBerry expands to the latest NanoPi & OrangePi platforms

NanoPi recent additions to ModBerry series

Introduced in November 2017, the ModBerry M300 series, based on NanoPi NEO revolutionised the economic segment of Industrial IoT devices and proved, that automation and monitoring can be done effectively with low expenditure on industrial installations.

Read more: http://linuxgizmos.com/automation-controller-runs-linux-on-a-nanopi-neo-sbc/

https://www.cnx-software.com/2017/11/15/techbase-modberry%E2%80%8B-m300-linux-iot-gateway-%E2%80%8Bis-powered-by-nanopi-neo-board/

To ensure constant development of TECHBASE’s solutions and cutting-edge technology, the NanoPi platform part of ModBerry series is expanded by updated ModBerry M300 N2 product, based on NanoPi NEO2. The new addition features Quad-core Cortex-A53, twice more RAM than previous version of NanoPi NEO and Gigabit Ethernet for fast communication.

For even wider range of communication interfaces and application possibilities, TECHBASE offers now ModBerry M300 N2+ based on the NanoPi NEO Plus2. M300 N2+ is equipped with 8GB eMMC, features more USB ports, Gigabit Ethernet port like M300 N2 and is supported with onboard Wi-Fi/Blutetooth 4.0 to ensure many channels of data management.

ModBerry M300 series can optionally support an external 2.5″ SATA hard disk and 2242 SSD storage units with M.2 interface thanks to onboard JMS567 USB to SATA controller. With extra storage space, data management of specific installations would be more convenient than sending all unprocessed data into cloud or directly to user.

OrangePi capabilities

To meet the Industrial IoT market demands the ModBerry family joined new embedded computer platform, offering adjustable solutions for every industrial installation. ModBerry M300 O1/O2 series is formed by two OrangePi module boards offering different approach to IoT than NanoPi solutions.

ModBerry M300 O1 based on OrangePi Zero Plus features Allwinner H5 (Quad-core Cortex-A53) SoC, moderate 512MB RAM, storage memory option with microSD slot, USB and Gigabit Ethernet port. The wireless communication is supported with onboard Wi-Fi module.

Offering much higher performance and wider feature range, the ModBerry M300 O2 features same SoC as M300 series, but thanks to OrangePi Zero Plus2 means, the device is equipped with onboard 8GB eMMC, extra microSD expansion slot as alternative and wired/wireless interfaces, e.g. HDMI, Wi-Fi, Bluetooth 4.0.

ExCard modules to peak the performance

Every TECHBASE’s industrial computer is supported by ExCard add-on modules for extra RS-232/485 serial ports, Ethernet ports, PCIe slots, analog input and output, digital I/Os, relays, M-Bus interface, opto-isolation, accelerometer, etc. To provide specific communication paths, ModBerry can be rigged with additional Wi-Fi/Bluetooth module, 3G/LTE, NarrowBand-IoT, LoRa, ZigBee, GPS and Wireless M-Bus.

The latest options for ModBerry series are:

  • SuperCap expansion, to provide constant power supply as a UPS option
  • OLED 0.96” & new OLED 1,3″ screen, allowing the control without the need of connecting into the device
  • ESP32 module as a security chip, to add a firewall into control installation and ensure constant operation of the device, even with power drops and random events
  • Aluminum case, to grant much higher durability for extra harsh industrial conditions
  • Mentioned earlier SATA/M.2 SSD controller for extra data storage

The updated M300 availability

Currently all the updated M300 samples, including M300 N2, N2+, O1, O2 are available on demand. Please contact TECHBASE’s sales department via http://modberry.techbase.eu/ contact form with specific requirements to receive an offer that will suit the project’s needs. Since the M300 update is still under the development, specific datasheets will be available in mid-February. The pricing of each unit may vary on the basis of configuration and order quota.

Posted on

LORA MQTT: Perfect Couple – in RaspberryPi & ESP32 Ecosystem

TECHBASE Industrial Computers are designed for easy integration of LoRa / MQTT networks. ModBerry devices base on Raspberry Pi / NanoPi / Intel UpBoard platform communicate with both Cloud and Sensor layer (backed with ESP32 Moduino devices) of your installation via MQTT protocol. Gateway utilizes the features of many protocol libraries, such as original TECHBASE’s iMod protocol controller – installable both on the Gateway device itself or externally with wide range of possibilities (industrial computer, hosted server, etc.). Our devices fully support Node-RED, CODESYS, OpenHAB and many more open protocol libraries.

Wide range of protocol support

All TECHBASE’s solution can be empowered with iMod software incl. protocol support for industrial interfaces, e.g. M-Bus, Modbus, SNMP, MQTT. iMod software works seamlessly with Node-RED using MQTT protocol, allowing use of bacnet and direct control over devices I/Os with Google’s platform-neutral protobuf – extensible mechanism for serializing structured data and zeroMQ controls to connect the code in any modern language, on any platform. The protocol drivers library can be expanded with CODESYS development system to support PROFIBUS, CANopen, EtherCAT, PROFINET and EtherNet/IP.

iMod M-Bus, Wireless M-Bus, Modbus TCP/RTU, SNMP, MQTT, SMS, E-MAIL, SQL/CSV
CODESYS PROFIBUS, CANopen, EtherCAT, PROFINET, EtherNet/IP
Node-RED, etc. MQTT, bacnet, eISCP
OpenHAB Commercial product integration
Other open-source protocols IEC 61850, IEC 60870-5-104, DLMS/COSEM, KNX, eHz meters, IEC 62056-21, REST

 

[av_button label=’CHOOSE YOUR DEVICE’ link=’http://modberry.techbase.eu/#comparison’ link_target=” size=’x-large’ position=’center’ icon_select=’yes’ icon=’ue8a5′ font=’entypo-fontello’ color=’custom’ custom_bg=’#ffbb00′ custom_font=’#ffffff’ admin_preview_bg=”]

 

Posted on

New IoT Gateway based on NanoPi Neo

In October 2017 TECHBASE introduced newest economical addition to their M-Bus/Modbus Gateway family. Success of ModBerry 500 series based on Compute Module 3 and ModBerry M700 based on NanoPi M2 drove to further development of this efficient platform. TECHBASE proudly presents ModBerry M300 powered by NanoPi NEO.

    • CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz
    • DDR3 RAM: 512MB
    • Connectivity: 10/100M Ethernet, RS-232, RS-485
    • USB Host: ext. Type-A x1
    • Wireless communication: Wi-Fi, Bluetooth, LoRa, NB-IoT (LTE cat. NB1) /GPRS/EDGE, 3G/GPRS, ZigBee, Sigfox support
    • Working Temperature: -40℃ to 70℃
    • OS/Software: u-boot, UbuntuCore, Debian and Android

Download PDF datasheet: http://www.a2s.pl/products/ModBerry/ModBerry_M300_EN.pdf

ModBerry M300 is designed for easy integration of Modbus RTU and TCP/MQTT/SNMP networks. With this device, Modbus serial slave devices can be seamlessly added into an existing Modbus TCP network, and Modbus TCP slaves can be made accessible to serial masters. It also has a remote web access panel that allows you to manage groups of devices. That makes integration customizable and easy.

Wide range of protocol support

All TECHBASE’s solution can be empowered with iMod software incl. protocol support for industrial interfaces, e.g. M-Bus, Modbus, SNMP, MQTT. iMod software works seamlessly with Node-RED using MQTT protocol, allowing use of bacnet and direct control over devices I/Os with Google’s platform-neutral protobuf – extensible mechanism for serializing structured data and zeroMQ controls to connect the code in any modern language, on any platform. The protocol drivers library can be expanded with CODESYS development system to support PROFIBUS, CANopen, EtherCAT, PROFINET and EtherNet/IP.

iMod M-Bus, Wireless M-Bus, Modbus TCP/RTU, SNMP, MQTT, SMS, E-MAIL, SQL/CSV
CODESYS PROFIBUS, CANopen, EtherCAT, PROFINET, EtherNet/IP
Node-RED, etc. MQTT, bacnet, eISCP
OpenHAB Commercial product integration
Other open-source protocols IEC 61850, IEC 60870-5-104, DLMS/COSEM, KNX, eHz meters, IEC 62056-21, REST

MEET ModBerry SERIES

Posted on

M-Bus/Wireless M-Bus support for Moduino X1/X2

Moduino based on ESP32 can now be equipped with TECHBASE’s original mBus10/60/400 converter module. The converter operates as a M-Bus Master and allows user to connect up to 400 standard M-Bus receivers (Slaves) through M-Bus Master output or fewer devices at a higher M-Bus load over long distances. Moduino, as a fully capable Industrial IoT device, can now be used with every device equipped with M-Bus interface, e.g. heat meters, electricity meters, gas meters, executive modules, recorders, measuring instruments.

Wireless M-Bus support

TECHBASE has added high performance module for wireless M-Bus connectivity and multi-hop networking into Moduino series expansion options. The module is configured as an embedded micro system or simple data modem for low power applications in the metering specifically allocated band of 169 MHz or in the ISM band of 868 MHz. The device is can be configured for interoperability in a WMBus network for Industrial IoT applications.

The RF implementation guarantees best-in-class performance in terms of covered area and power consumption. The output power can be increased up to +30 dBm on the 169 MHz band (+27 dBm on optimized version for highest power efficiency) and up to +15 dBm on the 868 MHz band. The extremely reduced power consumption gives access to long lasting battery life requirement (up to 2 μA in sleep mode for wireless M-Bus module with an RTC clock running).

The Moduino devices  can be provided with a W-MBus stack specifically developed by Embit for the platform that allows to integrate the module in the desired system without effort and simplify the interaction in WMBus networks.

MEET MODUINO X SERIES