Industrial ESP32-based devices utilizing NarrowBand-IoT wireless technology

The NB-IoT is becoming a standard in wireless communication of IoT devices, for standalone solutions and complex installations with thousands of units, coordinated with gateways. Will NarrowBand-IoT replace other wireless technologies in industrial automation?

What exactly is NarrowBand?

NarrowBand-IoT (NB-IoT) is a radio technology in the field of LPWAN (Low Power Wide Area Network) dedicated for IoT devices, operating on the licensed frequency band used by telecommunications operators.

The biggest advantages of NB-IoT include:

  • long battery life (up to 10 years),
  • efficiency in the amount of data transferred,
  • intra-building penetration,
  • the ability to connect even tens of thousands of devices in one system,
  • a global standard,
  • a high level of security and low cost

You can build mass solutions and those that until now were considered unprofitable. NB-IoT technology works in the licensed band, so there is no risk of interference and blocking communication by competing networks.

The service life of devices powered by two AA batteries is up to 10 years. However, the devices themselves are constructed in such a way that they can work for many years without the need for technical supervision and recharging the battery.

NB-IoT used in industrial solutions

One of many uses of NarrowBand-IoT wireless modems can be communication of edge devices, dedicated to data management, process control (e.g. with MQTT protocol) and monitoring. Latest ESP32-based eModGATE controller from TECHBASE company is a series utilizing MicroPython environment to provide data management solutions for end-points applications. The eModGATE has built-in Wi-Fi/BT modem and can be equipped with additional NarrowBand-IoT modems

eModGATE with ESP32

eModGATE eqipped with wireless NB-IoT modem are perfect for industrial automation solutions, e.g. data logging, metering, telemetrics, remote monitoring, security and data management through all Industrial IoT applications.

Supported bandwidths:

  • Global-Band LTE CAT-M1:  B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28/B39;
  • Global-Band LTE CAT NB-IoT1:  B1/B2/B3/B5/B8/B12/B13/B17/B18/B19/B20/B26/B28;
  • GPRS/EDGE 850/900/1800/1900Mhz Control Via AT Commands

Supported data transfer:

  • LTE CAT-M1(eMTC) – Uplink up to 375kbps, Downlink up to 300kbps
  • NB-IoT – Uplink up to 66kbps, Downlink up to 34kbps
  • EDGE Class – Uplink up to 236.8Kbps, Downlink up to 236.8Kbps
  • GPRS – Uplink up to 85.6Kbps, Downlink up to 85.6Kbps

ModBerry M500 series with SSD/M.2 support and next level configurability

In 2017, TECHBASE Group introduced an industrial-grade automation controller, based on popular Raspberry Pi 3 board. The device called ModBerry M500 incorporated latest Raspberry Pi SBC and TECHBASE’s standard industrial board to enhance the capabilities of market RPi3.

ModBerry M500 added wide range of I/Os to the board, including RS232/485 serial ports, digital and analog I/Os, 10/100Mbps Ethernet port, USB, 1-Wire and optional CAN. ModBerry series also offers additional wired interfaces and wireless communication modules with their proprietary modules called ExCard. The range of wireless modules include 3G/LTE, NarrowBand-IoT (NB-IoT), Wireless M-Bus, ZigBee, LoRa, Sigfox, Wi-Fi, Bluetooth and many more.

Rasbperry Pi 4 upgrade of ModBerry M500

In 2019, with the premiere of Raspberry Pi 4, TECHBASE upgraded their ModBerry M500 device with the latest revision of this popular SBC, further enhancing the performance of their device. New 1.5GHz quad-core 64-bit ARM Cortex-A72 processor (approximately 3 times better performance than previous Cortex-A53 powering Raspberry Pi 3+ Model B and Compute Module 3 and 3+). ModBerry M500 can now be configured from 2GB / 4GB LPDDR4 SDRAM options.

Revised ModBerry M500 features Gigabit Ethernet, USB3.0, two microHDMI ports supporting OpenGL ES 3.x and 4Kp60 hardware decode of HEVC video. The device is fully compatible with previous versions of Rasbperry Pi based Industrial IoT devices and accessories from TECHBASE.

M.2 SSD support for ModBerry M500

Latest software update for Raspberrry Pi 4, now available in beta, makes it possible to boot directly from USB 3.0 connected drive, without the need for an SD card. With a possibility to run the OS directly from SSD is a massive breakthrough, allowing users to improve the performance of the system and data access speed.

ModBerry M500 offers now a feature to include M.2 SSD drive in industrial-grade device. The merge of industrial interfaces and SSD-boosted Raspberry Pi 4 is a perfect solution for on-site data management and gateway application.

ModBerry M500 roadmap for 2020+

Difficult times of coronavirus outbreak in early 2020 changed the expectations for new Industrial IoT devices. Slowed market needed some adjustments to overly expanded devices with reserve of not quite necessary features for different applications – often raising the price of the device.

New addition to ModBerry M series and Industrial IoT Ecosystem offered by TECHBASE Group is the revised ModBerry M500 Lite device, to ensure the full configurability of device’s resources.

ModBerry M500 Lite features:

  • Quad-core ARM Cortex-A72 1.5GHz processor
  • 2/4GB and new 8GB LPDDR4 RAM option
  • SSD M.2 support for mass storage boot
  • Industrial-grade enclosure with DIN-rail mount
  • RTC

ModBerry M500 Lite optional resources:

  • Serial RS232/422/485 ports
  • Digital and Analog I/Os
  • Relays
  • 10/100Mbps Ethernet
  • CAN, 1-Wire
  • M-Bus Master / Slave
  • TPM Security chip
  • OLED 0.96” screen
  • SuperCap UPS

New ModBerry M500 Lite not only is a versatile device with wide array of available optional resources, but also incredible fast with quad 1.5GHz processor, up to 8GB RAM and last but not least, M.2 SSD bootable drive for system, applications and rapid data availability, without the need to bootstrap an SD card. RTC with watchdog option and additional TPM Security chip ensures data safety and breach protection.

Pricing and availability of ModBerry M500 Lite

Price of the device is yet to be specified, but it will be significantly lower than standard ModBerry M500, which can be configured here. Preliminary devices are available to order – please contact our sales department via contact form or Live Chat at https://iiot-shop.com/ to receive a quotation for the configuration needed.

Updated M500 Industrial IoT device with latest Raspberry Pi 4

Raspberry Pi 4 Model B

The newest addition to TECHBASE’s Industrial IoT Ecosystem is an updated ModBerry M500 with latest Raspberry Pi 4 development board, equipped with a 1.5GHz quad-core 64-bit ARM Cortex-A72 processor (approximately 3 times better performance than previous Cortex-A53 powering Raspberry Pi 3+ Model B and Compute Module 3 and 3+). ModBerry M500 can be configured from 1GB / 2GB / 4GB LPDDR4 SDRAM options.

Raspberry Pi 4 Industrial IoT ModBerry M500

Gigabit Ethernet & USB 3.0 on-board

Another new and appreciated feature is an upgrade to full-throughput Gigabit Ethernet for fast network connection and 2x USB 3.0 / 2x USB 2.0 for additional I/O, data storage extension and fast wireless modem support. ModBerry M500 with Rasbperry Pi 4 has dual-band 802.11ac Wi-Fi and Bluetooth 5.0 on-board. For additional wireless networks expansions, you can choose from variety of Industrial IoT modems from TECHBASE offer, incl. 3G/LTE, NarrowBand-IoT (NB-IoT), Wireless M-Bus, ZigBee, LoRa, Sigfox, Wi-Fi, Bluetooth and many more.

Enhanced Video support for RPi4

The full HDMI port has been replaced with two microHDMI ports with dual monitor support, at resolutions up to 4K, VideoCore VI graphics, supporting OpenGL ES 3.x and 4Kp60 hardware decode of HEVC video. The device is fully compatible with previous versions of Raspberry Pi based Industrial IoT devices and accessories from TECHBASE.

Raspberry Pi 4 based ModBerry M500 availability

New ModBerry M500 with three variants of Raspberry Pi 4 based devices is available for pre-orders via https://iiot-shop.com/product/modberry-m-series/ For specific delivery time please contact us via e-mail or Live Chat, directly at Industrial IoT Shop.

eSIM support for Rasperry Pi based ModBerry industrial device

eSIM support for Rasperry Pi based ModBerry industrial device

The embedded SIM card (eSIM) is a form of programmable SIM card that is directly built in the device. eSIM is a global GSMA specification that enables remote SIM delivery to any supported device, and GSMA defines eSIM as the SIM card for the next generation of connected consumer / professional devices and network solution with the use of eSIM technology.

Easy SIM operator swap

In Industrial IoT applications in which there is no need to change the SIM card, the need of using a connector is avoided, which increases reliability and data security. eSIM can be remotely configured – users can add or change operators without having to physically swap the SIM card from the device. It is often a crucial requirement for the installations where factors such as temperature, water and shock resistance, as well as lack of access forces user to choose remote solutions.

eSIM Raspberry Pi Connvectivity

Raspberry Pi & ESP32-based devices

TECHBASE company is now developing eSIM support for Raspberry Pi and ESP32 industrial devices, such as ModBerry and Moduino X to improve the handling of wireless modem connectivity. To receive an offer for ModBerry/Moduino device with eSIM-based modem, contact our Sales Department via e-mail or Live Chat.



SIMCom modems now available in Industrial IoT Shop

SIMCom SIM7000G

TECHBASE’s Industrial IoT devices, ModBerry & Moduino series supports latest SIMCom global-band SIM7000G eMTC & NB-IoT Module. Now the latest SIM7000G as well as 7000E / 7000A versions of modem are available at IIoT-Shop.

SIMCom SIM7000G

Our ModBerry / Moduino devices equipped with latest SIM7000G modem are perfect for industrial automation solutions, e.g. data logging, metering, telemetrics, remote monitoring, security and data management through all Industrial IoT applications.

Supported bandwidths:

    • Global-Band LTE CAT-M1:  B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28/B39;
    • Global-Band LTE CAT NB-IoT1:  B1/B2/B3/B5/B8/B12/B13/B17/B18/B19/B20/B26/B28;
    • GPRS/EDGE 850/900/1800/1900Mhz Control Via AT Commands

Supported data transfer:

    • LTE CAT-M1(eMTC) – Uplink up to 375kbps, Downlink up to 300kbps
    • NB-IoT – Uplink up to 66kbps, Downlink up to 34kbps
    • EDGE Class – Uplink up to 236.8Kbps, Downlink up to 236.8Kbps
    • GPRS – Uplink up to 85.6Kbps, Downlink up to 85.6Kbps

You can browse wireless modem category here: https://iiot-shop.com/product-category/modems/

Supported ModBerry series

Supported Moduino series

New SIM7000G modem for ModBerry / Moduino Industrial IoT devices

TECHBASE’s Industrial IoT devices, ModBerry & Moduino series, now supports latest SIMCom global-band SIM7000G eMTC & NB-IoT Module. New SIM7000G supersedes previous 7000E / 7000A / 7000C versions of modem and provides a universal band set with global coverage, in opposite to Europe, America and China-only solutions.

Our ModBerry / Moduino devices equipped with latest SIM7000G modem are perfect for industrial automation solutions, e.g. data logging, metering, telemetrics, remote monitoring, security and data management through all Industrial IoT applications.

Supported bandwidths:

  • Global-Band LTE CAT-M1:  B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28/B39;
  • Global-Band LTE CAT NB-IoT1:  B1/B2/B3/B5/B8/B12/B13/B17/B18/B19/B20/B26/B28;
  • GPRS/EDGE 850/900/1800/1900Mhz Control Via AT Commands

Supported data transfer:

  • LTE CAT-M1(eMTC) – Uplink up to 375kbps, Downlink up to 300kbps
  • NB-IoT – Uplink up to 66kbps, Downlink up to 34kbps
  • EDGE Class – Uplink up to 236.8Kbps, Downlink up to 236.8Kbps
  • GPRS – Uplink up to 85.6Kbps, Downlink up to 85.6Kbps

Our ModBerry / Moduino devices with global-band SIM7000G are available for testing and developing purposes, due to pending certifications of this module. For more information please contact our sales managers via live chat or contact forms.

Supported ModBerry series

Supported Moduino series

ModBerry M500 upgrades to Raspberry Pi 3 B+

The latest version of Raspberry Pi development board, Raspberry Pi Model 3 B+, is now available as a platform for ModBerry M500 industrial computer series. Raspberry Pi 3 Model B+ (Plus) offers has more computing power and much greater possibilities in the field of wired and wireless communication.

The biggest new feature introduced in 2016 is the Raspberry Pi 3 wireless support. Now the creators took a step forward and refined the solution. The new Raspberry Pi 3 Model B+ – supports two-band Wi-Fi (2.4 GHz and new 5 GHz), Bluetooth version 4.2  and Ethernet over USB 2.0 (up to 300 Mb / s). Upgraded ModBerry M500 series is powered by s more powerful heart, in the form of a Broadcom BCM2837B0 quad-core processor clocked at 1.4 GHz. Power-over-Ethernet support has also appeared, and heat dissipation has been improved.

ModBerry M500 on Raspberry Pi 3 Model B+

ModBerry M500 vs ModBerry 500(CM3)

Standard ModBerry 500 series is based on Raspberry Pi Compute Module 3, an industrial version of commercial Raspberry Pi branch, with flagship Raspberry Pi 3 Model B+. Used Compute Module is more suitable for custom products, such as our ModBerry 500 industrial computer, which can be adapted to customer’s need with wide range of extension modules from TECHBASE. ModBerry equipped with CM3 can be configured to support chosen number of RS-232/485 serial ports, Digital and Analog I/Os, various setup of Ethernet/USB ports, CAN interface, 1-Wire and wireless modems: 3G/LTE, GPRS/EDGE, GPS, LoRa, ZigBee, Wireless M-Bus, NarrowBand-IoT and many more.

The updated M500 availability

Currently the updated M500 samples, are available on demand. Please contact TECHBASE’s sales department via http://modberry.techbase.eu/ contact form with specific requirements to receive an offer that will suit the project’s needs. Since the M300 update is still under the development, the pricing of each unit may vary on the basis of configuration and order quota

ModBerry expands to the latest NanoPi & OrangePi platforms

NanoPi recent additions to ModBerry series

Introduced in November 2017, the ModBerry M300 series, based on NanoPi NEO revolutionised the economic segment of Industrial IoT devices and proved, that automation and monitoring can be done effectively with low expenditure on industrial installations.

Read more: http://linuxgizmos.com/automation-controller-runs-linux-on-a-nanopi-neo-sbc/

https://www.cnx-software.com/2017/11/15/techbase-modberry%E2%80%8B-m300-linux-iot-gateway-%E2%80%8Bis-powered-by-nanopi-neo-board/

To ensure constant development of TECHBASE’s solutions and cutting-edge technology, the NanoPi platform part of ModBerry series is expanded by updated ModBerry M300 N2 product, based on NanoPi NEO2. The new addition features Quad-core Cortex-A53, twice more RAM than previous version of NanoPi NEO and Gigabit Ethernet for fast communication.

For even wider range of communication interfaces and application possibilities, TECHBASE offers now ModBerry M300 N2+ based on the NanoPi NEO Plus2. M300 N2+ is equipped with 8GB eMMC, features more USB ports, Gigabit Ethernet port like M300 N2 and is supported with onboard Wi-Fi/Blutetooth 4.0 to ensure many channels of data management.

ModBerry M300 series can optionally support an external 2.5″ SATA hard disk and 2242 SSD storage units with M.2 interface thanks to onboard JMS567 USB to SATA controller. With extra storage space, data management of specific installations would be more convenient than sending all unprocessed data into cloud or directly to user.

OrangePi capabilities

To meet the Industrial IoT market demands the ModBerry family joined new embedded computer platform, offering adjustable solutions for every industrial installation. ModBerry M300 O1/O2 series is formed by two OrangePi module boards offering different approach to IoT than NanoPi solutions.

ModBerry M300 O1 based on OrangePi Zero Plus features Allwinner H5 (Quad-core Cortex-A53) SoC, moderate 512MB RAM, storage memory option with microSD slot, USB and Gigabit Ethernet port. The wireless communication is supported with onboard Wi-Fi module.

Offering much higher performance and wider feature range, the ModBerry M300 O2 features same SoC as M300 series, but thanks to OrangePi Zero Plus2 means, the device is equipped with onboard 8GB eMMC, extra microSD expansion slot as alternative and wired/wireless interfaces, e.g. HDMI, Wi-Fi, Bluetooth 4.0.

ExCard modules to peak the performance

Every TECHBASE’s industrial computer is supported by ExCard add-on modules for extra RS-232/485 serial ports, Ethernet ports, PCIe slots, analog input and output, digital I/Os, relays, M-Bus interface, opto-isolation, accelerometer, etc. To provide specific communication paths, ModBerry can be rigged with additional Wi-Fi/Bluetooth module, 3G/LTE, NarrowBand-IoT, LoRa, ZigBee, GPS and Wireless M-Bus.

The latest options for ModBerry series are:

  • SuperCap expansion, to provide constant power supply as a UPS option
  • OLED 0.96” & new OLED 1,3″ screen, allowing the control without the need of connecting into the device
  • ESP32 module as a security chip, to add a firewall into control installation and ensure constant operation of the device, even with power drops and random events
  • Aluminum case, to grant much higher durability for extra harsh industrial conditions
  • Mentioned earlier SATA/M.2 SSD controller for extra data storage

The updated M300 availability

Currently all the updated M300 samples, including M300 N2, N2+, O1, O2 are available on demand. Please contact TECHBASE’s sales department via http://modberry.techbase.eu/ contact form with specific requirements to receive an offer that will suit the project’s needs. Since the M300 update is still under the development, specific datasheets will be available in mid-February. The pricing of each unit may vary on the basis of configuration and order quota.

LORA MQTT: Perfect Couple – in RaspberryPi & ESP32 Ecosystem

TECHBASE Industrial Computers are designed for easy integration of LoRa / MQTT networks. ModBerry devices base on Raspberry Pi / NanoPi / Intel UpBoard platform communicate with both Cloud and Sensor layer (backed with ESP32 Moduino devices) of your installation via MQTT protocol. Gateway utilizes the features of many protocol libraries, such as original TECHBASE’s iMod protocol controller – installable both on the Gateway device itself or externally with wide range of possibilities (industrial computer, hosted server, etc.). Our devices fully support Node-RED, CODESYS, OpenHAB and many more open protocol libraries.

Wide range of protocol support

All TECHBASE’s solution can be empowered with iMod software incl. protocol support for industrial interfaces, e.g. M-Bus, Modbus, SNMP, MQTT. iMod software works seamlessly with Node-RED using MQTT protocol, allowing use of bacnet and direct control over devices I/Os with Google’s platform-neutral protobuf – extensible mechanism for serializing structured data and zeroMQ controls to connect the code in any modern language, on any platform. The protocol drivers library can be expanded with CODESYS development system to support PROFIBUS, CANopen, EtherCAT, PROFINET and EtherNet/IP.

iMod M-Bus, Wireless M-Bus, Modbus TCP/RTU, SNMP, MQTT, SMS, E-MAIL, SQL/CSV
CODESYS PROFIBUS, CANopen, EtherCAT, PROFINET, EtherNet/IP
Node-RED, etc. MQTT, bacnet, eISCP
OpenHAB Commercial product integration
Other open-source protocols IEC 61850, IEC 60870-5-104, DLMS/COSEM, KNX, eHz meters, IEC 62056-21, REST

 

[av_button label=’CHOOSE YOUR DEVICE’ link=’http://modberry.techbase.eu/#comparison’ link_target=” size=’x-large’ position=’center’ icon_select=’yes’ icon=’ue8a5′ font=’entypo-fontello’ color=’custom’ custom_bg=’#ffbb00′ custom_font=’#ffffff’ admin_preview_bg=”]

 

New IoT Gateway based on NanoPi Neo

In October 2017 TECHBASE introduced newest economical addition to their M-Bus/Modbus Gateway family. Success of ModBerry 500 series based on Compute Module 3 and ModBerry M700 based on NanoPi M2 drove to further development of this efficient platform. TECHBASE proudly presents ModBerry M300 powered by NanoPi NEO.

    • CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz
    • DDR3 RAM: 512MB
    • Connectivity: 10/100M Ethernet, RS-232, RS-485
    • USB Host: ext. Type-A x1
    • Wireless communication: Wi-Fi, Bluetooth, LoRa, NB-IoT (LTE cat. NB1) /GPRS/EDGE, 3G/GPRS, ZigBee, Sigfox support
    • Working Temperature: -40℃ to 70℃
    • OS/Software: u-boot, UbuntuCore, Debian and Android

Download PDF datasheet: http://www.a2s.pl/products/ModBerry/ModBerry_M300_EN.pdf

ModBerry M300 is designed for easy integration of Modbus RTU and TCP/MQTT/SNMP networks. With this device, Modbus serial slave devices can be seamlessly added into an existing Modbus TCP network, and Modbus TCP slaves can be made accessible to serial masters. It also has a remote web access panel that allows you to manage groups of devices. That makes integration customizable and easy.

Wide range of protocol support

All TECHBASE’s solution can be empowered with iMod software incl. protocol support for industrial interfaces, e.g. M-Bus, Modbus, SNMP, MQTT. iMod software works seamlessly with Node-RED using MQTT protocol, allowing use of bacnet and direct control over devices I/Os with Google’s platform-neutral protobuf – extensible mechanism for serializing structured data and zeroMQ controls to connect the code in any modern language, on any platform. The protocol drivers library can be expanded with CODESYS development system to support PROFIBUS, CANopen, EtherCAT, PROFINET and EtherNet/IP.

iMod M-Bus, Wireless M-Bus, Modbus TCP/RTU, SNMP, MQTT, SMS, E-MAIL, SQL/CSV
CODESYS PROFIBUS, CANopen, EtherCAT, PROFINET, EtherNet/IP
Node-RED, etc. MQTT, bacnet, eISCP
OpenHAB Commercial product integration
Other open-source protocols IEC 61850, IEC 60870-5-104, DLMS/COSEM, KNX, eHz meters, IEC 62056-21, REST

MEET ModBerry SERIES